Doosan Puma SMX3100 2020 £POA
Mil soğutucu sayesinde, C ekseni ve freze, Y-ekseni, punta, interlocked korumaları, Düşük volt ışık, B ekseni, Kalıp, Talaş konveyörü
Kontrol | FANUC 31i Model B5 |
Bar Kapasite | 102mm |
C ekseni | 0.0001 degree |
Chuck Boyutu | 305mm (12") |
Maksimum kesme çapı | 660mm |
Maximum Cutting Length | 1540mm |
Maximum workpiece weight | 500kg/1000kg supported |
salıncak | 660mm |
Tailstock Body Travel | 1562mm |
Punta Konik | MT #5 |
Hızlı İlerlemeler | XYZ: 48 x 36 x 48m/minute |
Mili Motor Gücü | 30/25kW |
Mil burnu | A2-11 |
Dönüş Hızı | 3000rpm |
Maximum Tool Diameter | 90mm |
Maximum Tool Diameter with Empty Adjacent Pockets | 130mm |
Maximum Tool Length | 450mm |
Maximum Tool Weight | 12kg |
Milling Motor Power | 26/18.5/15kW |
Milling RPM | 12000rpm |
Takım değiştirme kapasitesi | 40 Station |
Tool Change Time (Chip to Chip) | 7.8 seconds |
Tooling Configuration | CAPTO C6 |
B ekseni hareketi | +/-120 degrees (0.001 degree) |
Eksen sayısı kontrollü | 5 Axis Simultaneous |
X axis Travel | 630mm |
Y eksen hareketi | +/-150mm |
Z axis Travel | 1585mm |
Makine boyutları L x D x Y | 5700 x 3011 x 2761mm |
Makine ağırlığı | 16300kg |
Yapmak | Doosan |
model | Puma SMX3100 |
yıl | 2020 |
seri numarası | MM0025-000074 |
tip | Multi Tasking Lathes |
fiyat | £POA |
referansımız | PM9071 |
yer | Leicester |
DELIVERY
Delivery ex works, subject to prior sale Transport, siting & commissioning extra at cost
TERMS & CONDITIONS
The above information has been obtained to the best of our ability and belief, and from manufacturers where possible. It is given in good faith, but its accuracy cannot be guaranteed. Accordingly, it does not form a representation or constitute a contractual term. We advise you to check any vital details To download our full terms and conditions of sale please click here https://drive.google.com/file/d/1ZL9fW3mOUz3GzHS_eU2Rim4fN-8H075d/view?usp=sharing